Fire safety UAB

SIA ALTECO certified personnel provide the following services in the field of fire safety

Automatic fire detection and alarms alarm equipment project design - design

The project is developed according to the following building codes and Cabinet Regulations:

LBN 201-10 – “Būvju ugunsdrošība”;
LVS CENT/TS 54-14 “Ugunsgrēka atklāšanas un ugunsgrēka trauksmes sistēmas”;
MK noteikumi Nr. 82 – “Ugunsdrošības noteikumi”;
MK noteikumi Nr. 500 – “Vispārīgie būvnoteikumi”;
MK noteikumi Nr. 529 – “Ēku būvnoteikumi”.

Automatic fire detection and alarms installation of alarm systems

The project is developed according to the following building codes and Cabinet Regulations:

LBN 201-10 – “Būvju ugunsdrošība”;
LVS CENT/TS 54-14 “Ugunsgrēka atklāšanas un ugunsgrēka trauksmes sistēmas”;
MK noteikumi Nr. 82 – “Ugunsdrošības noteikumi”;

Automatic fire detection and alarms alarm equipment servicing

The project is developed according to the following building codes and Cabinet Regulations:

LBN 201-10 – “Būvju ugunsdrošība”;
LVS CENT/TS 54-14 “Ugunsgrēka atklāšanas un ugunsgrēka trauksmes sistēmas”;
MK noteikumi Nr. 82 – “Ugunsdrošības noteikumi”

Automatic fire alarms

The project is developed according to the following building codes and Cabinet Regulations:

LBN 201-10 – “Būvju ugunsdrošība”;
LVS CENT/TS 54-14 “Ugunsgrēka atklāšanas un ugunsgrēka trauksmes sistēmas”;
MK noteikumi Nr. 82 – “Ugunsdrošības noteikumi”;

Documentation

To accept a serviceable object with a built - in automatic fire detection and alarm, the following documents must be present on site:

1. Project and execution documentation;
2. Technical documentation of the equipment;
3. Operating instructions;
4. List of protected areas;
5. Act of acceptance of the system;
6. Survey report;
7. Annex No 4 – “TA Job Log”;
8. Annex No 5 – “System Run Log”;
9. Annex No 6 – “Maintenance Regulations”;
10. Instruction for on-duty personnel;
11. Logbook for the training of on-duty personnel;
12. On-call Reception Log;

Conclusion of the contract

By signing a contract on maintenance of fire alarm system you will receive:

To prevent or reduce material damage, and to protect people in the event of fire, all
the premises shall be equipped with fire alarms.
Fire alarm includes: fire alarm circuits with smoke detectors, heat detectors,
combination sensors, beam sensors. The fire alarm circuits are connected to a control panel, which can be a security-fire alarm as well as a specialized fire control panel. A dedicated fire panel provides increased protection against interference and false alarms, as the operating voltage is 24V (12V for security-fire panels) and it distinguishes between “ALARM” and “DAMAGE” signals. The specialist fire alarm will only sound an alarm if the fire detector is triggered.
The fire alarm may be local and / or connected to a central monitoring station.